|
Filters for the Charmilles/Agie machines are available for $15.25 per filter. These are 5 micron filters with the dimensions of 375x32x145mm. The filters are long lasting with a hard plastic top and bottom with a rubber seal. This filter is metal free with a Mann style design.
Filters for the Mitsubishi DWC/FX Series with the quick disconnect are available for $61.00 per filter. These are 5 micron filters with the dimensions of 300x58x500mm. This filter will also fit some models of the Hitachi and Seibu Wire EDM machines.
Filters for the Mitsubishi CX/FX series with the quick disconnect are $61.00 each. These are 5 micron filters. The dimensions for this filter are 305x48x336mm. This is the short version.
Filters for the C/H Series Mitsubishi are $53.00 per filter. These are 5 micron filters with dimensions of 300x29x500mm. This filter will also fit some models of Brother EDM machines.
Filters for the Sodick A & BF series are $61.00 per filter. These are also 5 micron filters. The dimensions are 340x46x300mm. This is the version without the cone. This filter will also fit some Fanuc Alpha Series machines.
Sinker filters: FLT-FT 5 micron for Easco, Sparcatron, Elox, Eltee, Gromax, Maximart, Sodick, Xermac are $26.00 each. Dimensions: 2 1/8" ID x 18" L x 6" OD.
FLT-SUTE 5 micron for Agie-Mondo Series, Charmilles Roboform, Chevalier, CHMR, Hansvedt, Pacific Controls, Santec/Sharp are $25.00 each. Dimensions: 1 1/4" ID x 14" L x 6" OD.
|
